A DIY floating shelf is a beautiful addition to any home. It’s a great way to show off your favorite piece of artwork or a poem.
With several surfaces, problems arise, but DIY floating shelves are not among them. You can find a variety of different kinds of floating shelves that vary in price and quality. Some are already built, but most companies offering them are selling a kit that can be built at your own home.
10+ Best DIY Floating Shelf Ideas and Designs
The beauty of these shelving systems is that you don’t have to buy a full-sized wall unit. If you are limited in space, then a floating shelf would be ideal for you. It can also be added to your living room or kitchen, just as easily as you would add a refrigerator.
The biggest challenge that you have to face when installing a floating shelf is getting it all on the floor. Since there are two walls, most people install the shelves on the front wall where the two walls meet. The middle wall is usually the back wall since it can’t be installed between the front and back walls.
All materials that you need for a DIY floating shelf are included with the kits. This includes plywood, tongue, and groove glue, and wood glue. You’ll also need a sturdy wooden cross member and a steel stud.
Once everything is assembled, it’s time to put the shelf up. Before you start any work, make sure that your counters and floors are clean. Take off any loose dirt or debris. For added strength and stability, you can purchase additional lumber or support the shelf.
Once you’ve cleaned the area, it’s time to assemble the shelves. The best way to do this is by starting from the bottom and working up. Start at the bottom and work your way up. You may need to drill pilot holes to get support brackets for the legs set. Start with one bracket and use the other bracket to hold the other shelf up. Now, you can bolt it to the leg brackets.
When the first support brackets are in place, then it’s time to add the leg braces. Take the plywood and cut it into the desired length. The brace can be glued or screwed directly into the wood.
Another option is to get braces to screw into the support brackets. The advantage of this is that it’s quick and easy. It’s an extra cost, but a great way to add some beauty to your storage system. You can attach the legs to the plywood and screw into the brackets.
You should be able to quickly assemble the shelf and let it dry before you can go any further. It will take a day or two to fully dry. To finish off the project, you can add a little polish and you’re finished.
This system can be a great way to display and organize all of your artwork and photographs. You can always add more shelving or work with a company that offers installation for you. If you are looking for a very attractive storage solution for your books and memorabilia, then DIY floating shelves are a perfect fit.